20 Gal Poly Gas Tank, 87-95 Jeep Wrangler (YJ)

  • Product Code: 52002633
  • In Stock
  • Description: Polyethylene Gas Tank, 20 Gallon, 1987-1995 Wrangler (2.5L & 4.2L) Replaces factory 15 and 20 gallon tank (See Details)
  • Brand: MTS
Have A Question?
Our customer service has the answer

Product Name:

Fuel Tank, Polyethylene, 20 Gallon, 2.5L or 4.2L Engine


  • 1987-1995 Jeep Wrangler YJ with 2.5L or 4.2L Engine


This is a USA Made Fuel Tank, made from Polyethylene. It holds 20 gallons and is for YJ models with a 2.5L or 4.2L engine.

Product Details:

  • OE type part
  • Direct fitment
  • Stock replacement part

Parts Included:

  • (1) Fuel Tank, Polyethylene, 20 Gallon, 2.5L or 4.0L Engine
  • (2) Upper Mounting Straps
  • (1) Sending Unit Gasket

Years Covered:

1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 and 1995

Replacement polyethylene gas tanks have no welds or seams and are guaranteed not to rust through for the life of your vehicle. The 1/4 thickness, provides insulating qualities that will reduce condensation and, most importantly, eliminate rust. Easy to install, using the original mounting hardware. Original fuel sending unit can be used with this tank. Made in the USA. This tank replaces both the 15 and 20 gallon tanks on the "1991-95" Wranglers. Also fits 1987-90 wranglers with 20 gallon tank "with rectangular opening" for sender. Mounts to the original skid plate and include 2 new straps. Be sure to check your sending unit as you may want to consider replacing it at this time along with the filler and vent hoses.

This tank will directly replace Domestic model #'s 52002633 & 52018287. 

This tank will NOT directly replace export model #'s 52018779, 52019226, 52007258 or 52002622 - a new skid plate and sending unit are required. 

Some early 1987-1990 Jeep® 20 gallon plastic fuel tanks had an open ended skid plate without the rolled heat shield over the exhaust pipe, we recommend replacing the skid plate as an exhaust/heat shield safety precaution. We also recommend replacing the fill and vent hoses to prevent possible fitment issues with the new skid plate.

Write a review

Note: HTML is not translated!
    Bad           Good

What Our Customers Are Saying

https://www.vintagejeepparts.com/image/cache/catalog/John Wimer Sr.-100x100..jpg

Thank God for Russell's in-depth knowledge of these ol critters and Vintage Jeep! I have a, well, lets just say rather demanding customer that is truly critical of the work done on his military equipment and without these great folks at Vintage Jeep I would be up that famous creek!

John Wimer Sr.

https://www.vintagejeepparts.com/image/cache/catalog/Jeff Cole-100x100..jpg

Russell has been a big help, nice to talk to someone knowledgable who knows what your going through and not some high volume catalog jockey...all your advice and diligence in getting me my parts has been greatly appreciated

Jeff Cole

https://www.vintagejeepparts.com/image/cache/catalog/Samantha Martin-100x100..jpg

Very nice people, extremely knowledgeable and always willing to help in any way they can! Definitely recommend!

Samantha Martin

https://www.vintagejeepparts.com/image/cache/catalog/Tricia Walshe Skrobarczyk-100x100..jpg

Great owners, great parts, great company!! If you've got a Jeep project, they're the ones to call!

Tricia Walshe Skrobarczyk

https://www.vintagejeepparts.com/image/cache/catalog/John A. Letney-100x100..jpg

Russell and his crew are the best. Great service and always Time to answer a question.

John A. Letney

https://www.vintagejeepparts.com/image/cache/catalog/Daniel St John-100x100..jpg

I have been buying jeep parts form these guys for a long time. They are very nice and have great customer service. Very knowledgeable, and will answer and question you have.

Daniel St John

https://www.vintagejeepparts.com/image/cache/catalog/Chris Eggers-100x100..jpg

Great people to do business with. They will go out of their way to help you!

Chris Eggers

https://www.vintagejeepparts.com/image/cache/catalog/Jeffery Hicks-100x100..jpg

I was only introduced to Vintage Jeep Parts early this year . I have had many jeeps since I got my first one in 1966 . This is the best parts house I have ever had the pleasure to do business with . Russell has put up with my mistakes and dialed me in many times already! I have many old jeeps I am working on for myself and others and look forward to working with Vintage Jeep Parts for everything they have or can get for me . This is who all businesses should model theirselves after . They are a true bright light in the industry! Sincerely Thank you

Jeffery Hicks