Rugged Ridge, Flat Tube Fender Flare, Upgraded, (Primered)

Fits:

1997-2006 Jeep Wrangler TJ


OFF-ROAD USE ONLY
Install One Side At a Time For Proper Fitment.

Product Information:
These over-built tubular fenders were designed for maximum suspension articulation while still aintaining a factory-style inner fender liner. Tough 0.120 wall tube is attached to 1/8 steel plating for one tough fender design. RRC Tubular Flat Fenders are direct factory replacements with a built in full fender liner (some drilling my be required) allowing for all factory engine accessories to be mounted by using the factory mounting hardware. Fenders are packed in pairs, primed for paint. Though these flares cover most tires, they are designed for offroad use and additional flare coverage may beneeded for onroad use in some states. Upgrade model bolts directly on using factory inner liner has ground welds and is ready for paint.

Length: 43" Width: 23" Height: 23" Weight: 40 Lbs.

SPECIAL NOTES:
These fenders have been designed to be a true bolt in application with no cutting or drilling required. The fenders have been designed to use the factory inner fender liner with most application holes pre-drilled. Because these fenders are designed to be installed on any TJ from 1997-2006 not all inner fender mounting holes can be accounted for through the full 9 year production run, but all efforts have been made to make this fender swap as easy as possible.

The fenders have been supplied with relocation side marker mounting brackets. These brackets have been designed to allow the movement of the side market lamp to the front of fender. This is an optional item and has been supplied as a safety feature. These fenders have been designed for heavy-duty applications and are considered for OFF-ROAD use only. The owner takes full responsibility for all safety and legal issues if used on road. It is the owner's responsibility to check with all state and local laws if intended for street use. It is the owner's responsibility to supply side marker lamps if desired.

Before installing fenders please read instructions completely. It is important not to completely disassemble the front clip of your Jeep® for this installation. If both fenders are removed at the same time alignment of all front end components will be affected and proper fitment will be compromised.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

What Our Customers Are Saying

https://www.vintagejeepparts.com/image/cache/catalog/John Wimer Sr.-100x100..jpg

Thank God for Russell's in-depth knowledge of these ol critters and Vintage Jeep! I have a, well, lets just say rather demanding customer that is truly critical of the work done on his military equipment and without these great folks at Vintage Jeep I would be up that famous creek!

John Wimer Sr.

https://www.vintagejeepparts.com/image/cache/catalog/Jeff Cole-100x100..jpg

Russell has been a big help, nice to talk to someone knowledgable who knows what your going through and not some high volume catalog jockey...all your advice and diligence in getting me my parts has been greatly appreciated

Jeff Cole

https://www.vintagejeepparts.com/image/cache/catalog/Samantha Martin-100x100..jpg

Very nice people, extremely knowledgeable and always willing to help in any way they can! Definitely recommend!

Samantha Martin

https://www.vintagejeepparts.com/image/cache/catalog/Tricia Walshe Skrobarczyk-100x100..jpg

Great owners, great parts, great company!! If you've got a Jeep project, they're the ones to call!

Tricia Walshe Skrobarczyk

https://www.vintagejeepparts.com/image/cache/catalog/John A. Letney-100x100..jpg

Russell and his crew are the best. Great service and always Time to answer a question.

John A. Letney

https://www.vintagejeepparts.com/image/cache/catalog/Daniel St John-100x100..jpg

I have been buying jeep parts form these guys for a long time. They are very nice and have great customer service. Very knowledgeable, and will answer and question you have.

Daniel St John

https://www.vintagejeepparts.com/image/cache/catalog/Chris Eggers-100x100..jpg

Great people to do business with. They will go out of their way to help you!

Chris Eggers

https://www.vintagejeepparts.com/image/cache/catalog/Jeffery Hicks-100x100..jpg

I was only introduced to Vintage Jeep Parts early this year . I have had many jeeps since I got my first one in 1966 . This is the best parts house I have ever had the pleasure to do business with . Russell has put up with my mistakes and dialed me in many times already! I have many old jeeps I am working on for myself and others and look forward to working with Vintage Jeep Parts for everything they have or can get for me . This is who all businesses should model theirselves after . They are a true bright light in the industry! Sincerely Thank you

Jeffery Hicks


Words can not express my thanks to Russell, Our relationship started in 2006 unbeknown to me or Russell as the story tells. When my dad was a live, After my dads passing in 2011 I was asked by my dad to finish his jeep he started in 06. Well it took me about 3 years to go retrieve the jeep which I though was further along that what I found, LOL when I went to pick it up I found bucket of bolts ,frame pieces, Motor parts and transmission disassemble on the bench and body parts every where. I gather them up and ask myself where am I going to get support for this. I had never built a jeep from gr

Auggie A.


Many years spent going .... And will keep going back for parts 1946 willys dj3a

Ghost S.